15kw flat die wood pellet machine in stock

INTRODUCTION:

The sawdust Pellet Machine, wood bran pellet machine, and biol fuel pellet machine produced by our company are compact in structure, easy to operate, stable in action, and can work continuously. It has the characteristics of unique design, reasonable mechanism, low consumption and high efficiency, strong and wear-resistant, and has reached the international leading level. The electronic control system of the main engine adopts the international standard configuration of the star-delta starter, and the operation is extremely stable. This type of machine is mainly for coarse fiber granulation, such as: sawdust, sawdust, branches, trunks, bark and other wood scraps; straw, cotton stalks, straw, rice husk and other crop straw; peanut shells, sunflower seed shells Plant waste such as melon and fruit shells, palm, bamboo powder, pasture, etc., as well as materials that are difficult to bond and form such as toner and waste paper. The pellets produced by this product have the characteristics of high density, high combustion value, low water content, low ash content and so on. This type of machine adopts three-pole variable speed and high-precision gear transmission. The hydraulic oil delivery system can automatically circulate oil between the gearbox and the main shaft bearing. It has low consumption, reasonable structure, economical and durable.

SPECIFICATION:

- Power: 15kw

- New generation Gear reducer system

- Capacity: 200-300kg/h

-Die Mould can choose:

4mm/6mm/8mm/10mm

- Roller numbers: 2 rollers

- Weight (kg) : 400kg

- Dimension (mm): 1200*550*1050

Whole set include:

*Pellet machine with electric motor
*electric control panel

*Repair Tool

*wooden box package

Precautions

1. The machine must be grounded safely, and the main power supply must be disconnected when checking the machine.

2. The moisture content of raw materials should be controlled at about 15%, which can be detected with a moisture measuring instrument.

3. During production, the motor must be started with no load before it can work, and the direction inversion is strictly prohibited.

4. It is strictly forbidden to open the door cover of the machine at will during the production process, and do not put your hands into the granulation chamber. The machine will generate high temperature after work, and the body should not be in contact with the machine to prevent safety accidents.

5. Check and remove the metal on the magnetic separator at the entrance at any time during work, pay close attention to the work situation, and shut down in time if any abnormality is found.